Yesterday I took a few minutes out to install the new Spinner USA Cargo Fork.
I was going to install it on either the Woodstock 707 or the Fezzari Alta Peak. But Moe graciously offered his K2 Lithium 4.0 as the test bed for the fork.
I had to cut down the steerer tube down to at least 7″ and used some spacers to make up for the excess. I cut it that long just to make sure we have enough space for other bikes we’ll be testing the fork on.
Not only does the fork work pretty good, but it also enhances the image of the bike!
Popularity: 2% [?]
