MtnBikeRiders.com

You got like three feet of air that time. Can I try it really quick?

Archive for February, 2011

Fūl Cargo Hydration Pack Review

Posted by Dan Burdett On February - 28 - 2011

 Powered by Max Banner Ads 

Fūl Hydration Pack

Recently I have gotten the chance to use & review the Fūl Cargo hydration pack. The pack comes with a 2 liter bladder (a little smaller than I normally use, but still workable) and has a fold over type opening (as opposed to the twist cap like Camelbak) and a push/pull lockout on the bite valve. The bladder has its own dedicated compartment with temperature shielding material to ensure your drink says cool. The pack has four main compartments, one of which is for the bladder. The other two are large multi-purpose compartments, and the last is a smaller front compartment that looks like it is geared toward your keys, wallet, phone, and MP3 player of choice. The main pocket is also expandable via a zippered release. While I don’t have any specifics on the volume of what the pack can carry, with the main pocket fully unzipped the pack can carry a good amount of stuff. (I put a small blanket inside the pack to shoot the picture of it full.) There are two side straps on to lock down all your gear from shifting around during use. There is also a pocket on the front left shoulder strap that could be used for a MP3 player or alternative location for your cell phone. My PDA/smart-phone style phone did not fit well in this pocket, but a standard phone should fit ok. Plus, personally, I would never risk losing or damaging my phone in a compartment that does not seal in one way or another. While the pack does not have a rain cover, it does a have a mesh netting that can be used to carry an XC helmet.

72oz/2L Reservoir

72oz/2L Reservoir

The best thing about the pack is the weight. The pack itself is very light. My normal pack is a Camelbak Mule with a 3 liter bladder. Even when completely empty and unpacked my pack itself still has some good weight to it. The Fūl Cargo however is feather light, and this is by far its best feature. The biggest issue I had with the Cargo was the bit valve. It did not allow enough water through the opening. It was like trying to take a drink through a coffee straw. The other problem with the bite valve is that it never completely closed. If gravity was pulling in favor of the bite valve, it would drip incessantly. I found this out the hard way with a mess on my kitchen floor. I had to always remember to store the pack with the bite valve at the top. The other issue I had was that there was not a good anchor point for hold the tubing during the ride. I can’t stand the end flopping around as I zip through the trails. I ended up looping it through the chest strap to keep it from floundering around.

Back: vents/channel to keep your back cool.

Back: vents/channel to keep your back cool.

The other issue I had with was the size of the pack. It seemed to be sized for the typical XC rider, small and thin. I had to wear it with all the straps as their maximum allowance to fit me. In the grand scheme of things, I may definitely be on the larger side, I’m not near any extreme in the size department of mountain bikers. Basically this pack just runs on the small side. This didn’t make it unusable for me, but it is not for the XL+ riders. Overall this is definitely a usable pack, but it also has room for improvement.

Fūl Cargo Fully Loaded.

Fūl Cargo Fully Loaded.

    Overview:
    Pros:
    -Good amount of storage room
    -Lots of pockets
    -Will carry a helmet
    Cons:
    -Bite valve
    -No rain cover
    -Small & Narrow (at least for bigger riders)

    Review Disclaimer

Popularity: 4% [?]

Pulled this from the Airborne Bicycles Facebook Fan Page. There are some nice perks to becoming a Flight Crew member.

Calling all Potential Airborne Flight Crew Members for 2011. The Call For Entries is now open!

We’re looking for five new Flight Crew members to replace positions that rotated out at the end of 2010. The gig includes a year-long Flight Crew membership, free trip to Sea Otter in April (!), free Airborne bikes (!!), and assorted kit and …schwag (!!!). Details are available in the linked PDF above (yes, it’s safe).See More


Popularity: 1% [?]

Sette Torx ST-107 Bearing Cup Press: Review

Posted by RL Policar On February - 25 - 2011

Sette Torx ST-107 Bearing Cup Press was sent to us by the kind folks of Sette USA.

Price: $54.98

Specs:

The Sette Torx ST-107 Bearing Cup Press uses several enhanced and updated features in comparison to other headset presses on the market. The Torx ST-107 has a longer threaded rod and resized press-plates that accommodates 1” to 1 1/8” headsets and includes stepped bushing cup adapters to fit most cup sizes. The ST-107 can also be used to install press-fit bottom brackets. The Torx ST-107 is constructed of nickel-plated, heat-treated steel making it very durable. It also has an updated quick-release bottom plate for easier use and removable long non-slip handles for years of comfortable use.

For the longest time I’ve had to slum headset installations by using an allthread, 2 bolts and a few washers. For the most part it worked, but there are times when it wouldn’t. I’d actually break washers in half because I’m torquing down on the bolts so much just to get the cups to sit properly.

Using home brew presses were great for once in a great while jobs. But, when you work on bikes as much as I do, then you’re better off getting an actual tool for the job. This particular tool from Park would cost a regular Joe as much as $120! Lucky for guys like you and I, Sette came up with their own version of a headset press that rivals the Park brand model. In fact, they look and work the same way.

Here’s the Sette Torx ST-107 in action. I’ve just finished installing a Chris King headset onto this frame.
Sette Headset press

Rubberized handles are removable for easy storage, and they also provide a comfortable grip.
Sette Headset press

The way it works, you place a cup on the head tube, adjust your locking mechanism to the correct depth, and turn the handles. It’s that simple!
Sette Headset press

This is the locking piece that goes on the bottom of the press, its basically a quick release. All you do it turn in off or on.
Sette Headset press

I’m actually really impressed by this tool, and the best part would be its price of $54.98! You simply can’t beat that! Besides this is the tool that every home mechanic needs to have. So stop messing with home brew presses or using two blocks of wood and a hammer to install headsets, make sure you get the Sette Torx ST-107 Bearing Cup Press, you won’t regret it!

Review Disclaimer

Popularity: 2% [?]

Shimano Winter Series 2011, #4

Posted by RL Policar On February - 24 - 2011

This past weekend the Downhill Department of the MtnBikeRiders.com Race team was in attendance for race # 4 of the Shimano Winter Series hosted at Southridge, Ca. (phew, that was a mouthful). This was a fun race to be at because days before the event, southern California had received a good amount of rain. This left the race course nice and tacky! Rather than boring you with a play by play of my race run (much like I have in my previous reports), I just want to share pictures that made this weekend super fun.

This is Corey Pond, newest racer on the team. Corey is one fast rider. He races in the Expert Category and is always coming in the top 30 (inside joke).
SRC # 4 DH 2011

Art “Speed Racer” Aguilar is somewhat like our DH “titser.” Art has taken on a role within our team to help us lowly beginners do better on our race runs.
SRC # 4 DH 2011

Remember how I was talking about the fun part of the race. Well here it is. After Corey and Art finished their race runs, they headed back up the course to cheer Wes and I on. Funny part about this, I remember hearing Art yelling as loud as he can and I do recall seeing Corey doing the little dance you see in the picture. That right there helped me chuckle a bit and I ended up having a bit more fun during my run.
SRC # 4 DH 2011

Here’s a shot of Wes coming through, check out Art blowing kisses…that’s classic! Corey must have polished off a few bottles of beer before we came through…look at the empty bottle in his hand…haha
SRC # 4 DH 2011

The end result for the DH Dept: Corey Pond placed 13th in Expert Men 19-26, Art Aguilar placed 9th in Expert Men 43-50. RL Policar placed 5th in Beg 27-34, Wesley Castro placed 4th Beg Men 35-42.

RL 5th place. Check out the socks!
SRC # 4 DH 2011

Wes 4th place.
SRC # 4 DH 2011

Next stop, the Winter Series Finals!

Popularity: 1% [?]

Neil Adams-Man of Action

Posted by RL Policar On February - 24 - 2011

Meet Neil Adams, long time friend of MtnBikeRiders.com. He’s also some sort of big shot sales manager for SixSixOne. This is Neil lining up for the XC race at Southridge this past weekend. Check out all the pink! Funny thing is, Neil and I geek out over the same style of clothing and odditees of biking such as Unicorns, socks, pinks and donuts….yes donuts.

Here’s what I mean by donuts. As I was sitting in the feed zone waiting for Dan Burdett to come around, Tracy (Neil’s wife) and one of their friends were joking about handing Neil a donut as he passes by. I didn’t think they were serious until I saw the box. Sure enough as Neil rounded the corner, their friend, who’s arm you’ll see in the picture sticks sticks out his hand and is holding a donut! I quickly snapped photos to document this badassery feedzone move. I was impressed and I know you will be too. Scheckitout!

Click on image for larger photo.
Neil Adams

Look how happy and refreshed he is after that awesome feedzone handoff.
Southridge #4 2011

Popularity: 1% [?]

Sponsors

Nutrisystem.com


About Me

MtnBikeRiders.com is a site that specializes in news, articles, tech tips, product reviews and more. We update the site on a daily basis. So make sure you check us out everyday for up to date information regarding mountain biking.

Twitter

    Photos

    bro bro brooooIMG_3315lil brobro bropickme-pickme1329570_362671417078803_100000078424027_1424671_1719431354_o