MtnBikeRiders.com

When you are a man, sometimes you wear stretchy pants in your room. It's for fun.

Category: Reviews

Woodstock Full Suspension 707 Review

Posted by RL Policar On March - 14 - 2007
Woodstock Bikes

Who:
As mentioned on their site.

Discount Mountain Bikes for Serious Recreational Bikers

Looking for great low prices for quality front suspension and full suspension mountain bikes? The aim of Woodstock Bikes is to provide serious recreational bikers an alternative to purchasing their mountain bicycles from a local bike shop in order to save lots of money!

Woodstock Bikes is focused on providing high quality bikes for the serious recreational rider at a lower price than what a local bike shop can offer. We are custom bike builder, so our high quality bike frames are custom designed and built with all other components being the same as what you will find on name brand bikes in your local bike shop.

Product Tested:
Woodstock 707

Price:
$899.99

Specs:
Bottom Bracket: Truvativ Powerspline
Brake Levers: Avid FR-5
Cassette: SRAM PG950, 11–34T, 9 speed
Crankset: Truvativ Blaze 3.0, 9 speed
Chain: SRAM PC-951
Chainwheel 44/32/22
Front Fork: Manitou Axel Elite FFD (Fluid Flow Damping) w/100mm Travel, Upgraded with Firm Spring & Lockout
Frame: Double-Butted Four-Bar 7005 Alloy (A614-0)
Front Brake: Avid BB5 Mechanical Disc
Front Derailleur: Shimano Deore Top Swing
Front Hub: WTB LaserDisc Lite
Grips Velo VLG-486AD2 ViceGrips
Handlebar: Answer ProTaper
Headset: WTB Momentum C
Pedals: Wellgo LU-964 Alloy
Rear Brake: Avid BB5 Mechanical Disc
Rear Derailleur: SRAM X-7
Rear Hub: WTB LaserDisc Lite
Rear Shock Manitou Radium R PPD (Platform Plus Damping) Air Shock
Rims: Dual Duty XC
Saddle: WTB Lazer V Team
Seatpost: Truvativ XR Single Bolt
Shifters: SRAM X-7 Trigger
Stem: Truvativ XR
Spokes: 14G Stainless Steel Black
Tires: WTB Weirwolf 26″ x 2.1″



About Me:

5’7″ 190lbs, 30 year old male. I ride a fixie on the road and various mountain bikes on the trails that included the Woodstock 707.

Testing Grounds: Fullerton Loop, Panorama Trail, and the streets of Fullerton.

First Impression:
When we first spoke to Jimmy Rigsby of Woodstock Bikes he had asked us which size we needed. I asked for a small or a 16″ frame. Then when I got the bike, I thought it was going to be way too small. But to my surprise the 707 was the perfect size for me.

Though I normally ride a medium bike, the small 707 fit like a glove. The geometry of the bike didn’t leave me leaning over too much and if needed, I could still raise the seat post without passing the minimum insertion.

The cockpit was very impressive with brands like SRAM, Answer, WTB and Avid.

Overall Performance
The Woodstock 707 is a very impressive bike. The price point of the bike at $899.99 makes this bike a contender against mountain bikes you would see at the shop.

On my first day out on the Woodstock 707, I really didn’t have to adjust anything other than the seat height and proper air pressure for the rear Manitou Radium shock. Other than that, the bike came to me tuned and ready to ride.

I took out the 707 on the Fullerton Loop, which provides a rider with a mixture of short but steep climbs, down hills and single track sections. On the first climb I simply locked out the front Manitou Axel to help me get over the crest of the hill. The lockout feature on the fork never failed during our tests. In fact it worked every time it was needed.

The Manitou Radium has Platform Plus Dampening, which means “provides improved power and pedaling efficiency.” Once I set my sag and air pressure on the shock for my weight, I basically forgot all about it. Its kinda like that infomercial by Ronco, “Set it and Forget it!” The rear shock does a great job in absorbing the smallest bumps to the bigger drops that I would take it on. The biggest drop the I took the 707 on was about 3 feet high. The rear shock never bottomed out nor lost air.

Tires on the 707 are a brand and tread pattern that I am very familiar with. These tires gave me a great experience riding through the down hill section, sand and some parts mud. But they gripped exceptionally well on the hard pack that I rode on.

The drive train was a mix of SRAM, TruVativ and Shimano components. This concoction of parts was as smooth as a good Pinot Grigio. The SRAM PG950 cassette combined with the SRAM PC 951 chain provided effortless pedaling and the SRAM X-7 rear derailleur made rear shifting more enjoyable. The front derailleur was manned by Shimano Deore. Each gear was hit right on cue, thanks to the frictionless shifting given by the SRAM X-7 Triggers.

Geometry on this bike was perfect for me. Moe even liked it. I typically prefer a more comfort, slightly bent riding position. Moe being a big roadie fan likes to lean forward. But the 707 hit the sweet spot for both of us. It was neither to upright or too far forward. Thanks to the geometry, the 707 climbs like a goat! I’ve never been this comfortable on a mountain bike,ever!

Weaknesses:
Right when I first got the 707, I took it to the LBS to show the guys and to get their opinions. Some of the mechanics took it around the parking lot to test it out. The General Manager of the shop wanted to air down the shock to have it fit his weight. Once he let out all of the air, he compressed the rear end to see if it would get the full travel on the shock. To our surprise, the rocker arm was hitting the top of the shock, which meant you couldn’t get the full travel on the rear end and potentially damaging the shock.

Though this was easily remedied by moving the shock position to the outer mounting bracket. Once that adjustment was made, the rocker arm was no longer hitting the the shock.

Another problem we had during our test was the drive train crank arm. The crank arm bolt came loose during our test. We had to cut our ride short that evening and by the time we got back to the car, the crank arm had vibrated loose.

I had mentioned both problems to Woodstock Bikes about it. They immediately responded by making sure they notify future customers of the rear shock/rocker arm problem and by adding an 8mm allen wrench with the bike when purchased. Apparently the problem with the TruVativ cranks has been experienced by other bike companies using the same model on their bikes.


Summary:

The Woodstock 707 is a great bike! It’s that simple really. Great value, great ride, great parts, what more can you ask for? Oh and another thing, Woodstock Bikes is a Rider owned company. What does that mean to you? Well basically Jimmy, the owner, rides his own 707 and is even a bigger critic of his product than most people would be. He had told me months ago, before the 707 hit the scene that he was testing out the prototype in the hills of Woodstock, Ga. He kept tweaking things on the bike to make sure it was perfect. By the end of it all, he figured out what would be the best marriage of components, geometry and price for a full suspension mountain bike.

My Opinion:
Is the Woodstock 707 worth it? Heck yeah it is. I dare you to compare it with the bikes you’ll find at the LBS. You’ll be surprised to know that the 707 is hundreds less than its leading competitors. The bike is a great ride. I only wish I could keep this bike because I really liked it, but (as my shoulders droop down) we have to return it to the folks of Woodstock Bikes.

Popularity: 7% [?]

KHS Tucson Update

Posted by Jeremy Yang On March - 10 - 2007

I’ve got to tell you, we’re getting some great weather here in Southern California. A group of us took advantage of the weather and went out riding this morning. We chose the always fun Fullerton Loop.

I rode my X-Cal while a good friend of mine got to try out the new KHS Tucson. He normally rides a 26″ aluminum bike so the Tucson is different for him in that it is a 29er and it has a steel frame. Most of the parts spec on the Tucson is similar to his 26″ mtn bike.

I just wanted to share with you some of his impressions on the bike:

- the bottom bracket is very strong. He felt that the Truvative Blaze crankset and the Truvativ Howitzer Splined outboard cartridge bearing bottom bracket made a very good pairing. It seemed to him that it was solid combination.
- the steel frame exhibited flex that his aluminum bike normally does not have. This seems to be a sought after trait in steel bike frames.
- he likes the 29er wheels. hehe
- he feels faster on the 29er. Maybe it’s the momentum or the ability to roll over small obstacles, but he definitely feels faster on the 29er than on his 26 inch bike.
- if he was in the market for another bike, he’d be willing to pay a bit more for a 29er with the same parts spec as a 26″ bike.

I also went to the LBS after the ride to tune up my X-cal and have some work done to it (you’ll find out soon what was done) and a couple of the mechanics took turns riding the Tucson and commenting on it. One of them, who used to race an X-Cal and just bought a Salsa Dos-Niner to race felt that the geometry of the Tucson was very similar to his new Dos-Niner. He liked the Tucson.

Just some quick impressions I thought you might be interested in hearing. If you’d like more info on the KHS Tucson, click here.

Popularity: 2% [?]

Thudbuster Seatpost First/Second Impressions

Posted by Jeremy Yang On February - 24 - 2007

Thudbuster (Website)

Originally Moe had the Thudbuster LT to test but he is currently in the process of selling his hardtail so I’ve been getting in some seat-time on it, literally. For those of you who are not familiar with the device, the Thudbuster is a suspension seatpost that gives about 3 inches of cushion.

When I first got it from Moe, I spent some time determining which elastomers to use for my weight. Because I was without the manual (RL had it in his garage), it took me a bit of time to figure out that the black/black setup would work best for me. But even without the manual, I was able to replace the elastomers easily because the suspension is pretty straight forward.

I’ve been riding the Thudbuster for a little over a week now and I have to admit that it has been an extremely welcome addition to my 29er hardtail. Here are some of my quick first impressions:

- The extra weight is not noticeable.
- It takes the chatter out of a hardtail ride and allows me to sit during parts of my ride I normally would have to stand.
- It easily adjusts to your weight by using different elastomers.
- It’s also easy to set your preferred seat angle.
- I think it looks cool, not dorky as some purists might think.
- The Lizard Skins cover does a good job of keeping the Thudbuster clean.

Thudbuster Covered
Thudbuster on a ride at El Moro, CA

A more thorough review will be written as I spend more time on the Thudbuster. In the meantime here is some information from the Thudbuster website:

* 3″ of ultra-plush travel
* Only 565-585 grams (610 grams or 4XL)
* 1-year warranty
* Unique US Patented design
* New CNC-machined aluminum alloy linkage
* New 1-piece forged tube and receptor
* New larger-diameter stainless-steel pivot pins
* New Teflon® coated pivot bushings
* New super-strong, twin-bolt, micro-adjust saddle clamp
* Complete 6-piece Double Barrel elastomer kit
* Illustrated installation and tuning guide
* Choice of tubing diameters

Check it out here and keep checking back for the full review.

Popularity: 6% [?]

Review: Fezzari Alta Peak UPDATE

Posted by Jeremy Yang On February - 9 - 2007

Earlier this week, RL & I spent some time tweaking the Alta Peak to fit my dimensions. We initially tried to install a longer stem, but we were missing a headset spacer, so we scrapped that idea.

We then spent some time tweaking the air pressure in the rear shock to minimize pedal bob & adjust the front fork to better fit my weight. These minor adjustment paid off nicely.

Where once I felt minimal pedal bob I now find virtually no pedal bob. When I climb, no bob. When I hammer, no bob. Pedal bob has disappeared to the point that I didn’t lock out the shock on any of my climbs.

Ario 2.2
This simple fix was completed rather quickly with the use of RL’s shock pump. You just find the cap on the shock, unscrew it, put the pump on and pump or release air until desired air pressure is achieved.

We also spent some time fiddling with the front fork. This change was less dramatic but helpful as well. Because RL previously rode this bike, the fork was a bit soft for my tastes. I noticed this when I was climbing on a previous ride. During the climbs, I had the feeling that the front end wanted to lift up. I originally attributed this phemomenon to bike geometry and the fact that the bike was a little too small for me. But after fiddling with the fork, the front end of the bike felt much more planted, even during my climbs. It might not hae been just a size issue afterall.

I guess the moral of this post is that getting your bike fit to you will help you to maximize the abilities of the bike as well as your comfort on the bike. Not doing so can leave you feeling unsure and uncomfortable.

Popularity: 1% [?]

Evomo DH Descent

Posted by Jeremy Yang On February - 8 - 2007

I got an Evomo t-shirt today. The DH Descent fits me quite nicely. Some shots for your viewing (I’d add “viewing pleasure” but my mug isn’t a “pleasure” for most people, the t-shirt is though).

Evomo DH Descent on Jeremy

Graphics are understated & nice

DH Descent Graphic

Cool sleeve Action

DH Descent Sleeve

Good quality stuff. Check out more at Evomo.

Popularity: 1% [?]

Sponsors



About Me

MtnBikeRiders.com is a site that specializes in news, articles, tech tips, product reviews and more. We update the site on a daily basis. So make sure you check us out everyday for up to date information regarding mountain biking.

Twitter

    Photos

    DouchebagadhereBikeSweetsAd(1)photoR&C 5-9-5 fixfontana